Get-Glo Marble Polishing Powder

Description

Get-Glo Marble Polishing Powder is a professional-grade product, and user-friendly that make you polish marble and remove fine scratches and marks. This polishing powder is especially effective on various marble surfaces. Apply this powder before crystallization can ensure the optimal effect.

Features

• High performance – excellent restoration
• Remove scratch and mark from marble surface
• High quality abrasive compound

Directions

Use with manual 175 RPM grinder:

1. Clean the surface. Make sure no floor finish and dust left on the surface.

2. Apply the polishing pad on the polisher.
3. Spray plenty of water on the surface, no more than 16 square feet.
4. Apply an appropriate of Get-Glo Marble Polishing Powder on the surface.
5.  Start to polish each panel with a polisher, and each panel requires 6 times of polish. Multiple polishing in heavy-wear area is recommended.
6. Spray some water if the powder dries out.
7. Polish the surface until the surface is passivated.
8. Use wet vacuum to clean the paste once the surface is completely passivated.
9. Rinse with water after polish.
10. Allow surface to dry, and wipe clean with a wet wipe. 

Cautions

1. The effect may vary based on types of limestone. Test in a small area before application.
2. Fatal if swallowed. Keep away from children. Wash hands after use.
3. If swallowed, drink large quantity of water and get medical attention. 
4. If contacted with eyes, flush with plenty of water for 15 minutes, and get medical attention immediately.