WAXSOL Wax Stripper is water-based stripper that removes wax, floor finish, and dirt quickly. Its special formula and mild odor are very suitable for hospital use and will not cause discomfort to the patients.

Features

Ideal for hospital use, gentle odor, ammonia-free
Water-based formula, low-foaming, low irritation
Dissolve wax, floor finish, stain quickly, fast-acting, deep-penetrating
Easy to apply, safe to use

Directions

Dilute with water up to 1-5 times (warm water is recommended, depending on the thickness of the layer).
Use a waxing machine with a water tank or mop to evenly apply the WAXSOL Wax Stripper to the treated surface.
After 3 to 5 minutes, use a waxing machine or scrubbing machine with sponge to scrub the floor. DO NOT let stripper dry out. If volatilized, spray water evenly is required.
Apply a vacuum cleaner to dry the floor, and thoroughly rinse the residual on the floor with clean water.
Make sure the floor is completely dry, and new wax can be applied.

Cautions

Apply the product only in well-ventilated environment. Keep the product from direct sunlight.
Keep away from children. Keep open flame away.
Wear protective gloves. Wash the cloth after apply.
Do not swallow the product. Avoid prolonged contact with the skin.
If swallowed, drink large quantity of water and get medical attention.
If contacted with eyes, flush with plenty of water for 15 minutes, and get medical attention immediately.

Related TDS and SDS

TDS and SDS are available upon request.

Sample Request

Sample is available upon request.