Shock-Free Antistatic Floor Finish is water-based floor finish that can be applied to various hard and soft flooring to quickly dissipate electrostatic and form a clear, gloss and abrasion resistant protective film on the floor. Shock-Free Antistatic Floor Finish will dry within 1 to 2 hours, and it can be used in clean room, electronic production plants, assembly and test areas under a relative humidity of 30% to 70%.

Features

Water-based formula, gentle odor, and safe
Quickly dissipate electrostatic charge
High gloss, abrasion resistance, water resistance, and slip resistance

Directions

Clean the floor and remove the wax with stripper - NS2 wax stripper is recommended.
Rinse the surface with water to wash off wax stripper.
Apply Shock-free with a microfiber wax applicator, e.g., a flat mop.
Wait for 1 to 2 hours before applying the second coat.
Ground the coated surface to dissipate static.

Cautions

Apply the product only in well-ventilated environment. Keep the product from direct sunlight.
Keep away from children.
Do not swallow the product. Avoid prolonged contact with the skin.
If swallowed, drink large quantity of water and get medical attention.
If contacted with eyes, flush with plenty of water for 15 minutes, and get medical attention immediately.

Related TDS and SDS

TDS and SDS are available upon request.

Sample Request

Sample is available upon request.