Germ & Odor Controller

Description

Germ & Odor Controller is designed to form a protective film in the car interior, which is antibacterial, deodorant and can decompose formaldehyde.

• Agent A: Nano Zinc
• Agent B: Nano Photocatalyst

Features

• Advanced nano zincs protective technology – combined with various nano materials to form an antibacterial film on the interior surface of the car
• Multiple protection – antibacterial, deodorizing, mold proofing, and decomposing hazardous emission, such as formaldehyde and VOCs.
• Safe, non-toxic, and Eco-friendly
• Durable protection – lasts up to 2 months

Directions

1. Thoroughly clean the car interior.
2. Pour an appropriate amount of Agent A to the fluid cup.
3. Turn on the air conditioner and set it to inside air mode.
4. Open the front and rear windows on the same side approximately 5 to 10 cm.
5. Spray half amount from the front window and rear window evenly. Close both windows to allow Agent A to circulate for 5 minutes.
6. Turn off the air conditioner.
7. Shake Agent B well and repeat step 2, 4 and 5. Allow Agent B stay in the car interior for 15 minutes. 
8. Turn on the air conditioner to let Agent B set well inside the car. 

Cautions

1. Set the pressure and the range of the spray gun to the maximum to reach an optimal atomization effect.
2. Wear mask during operation.
3. If swallowed or contact with eyes, get medical attention.